Cheetah print DTF transfer

Add a cheetah print to your gear. This set includes four 3 x 4 inch DTF transfers designed specifically for sleeve and shoulder placements.

Note: Heat press required for application

“Don't want to press it yourself? CLick here to Order Finished Shirt

1. Pre-press: Press your garment for 5 seconds to remove any moisture and wrinkles.

2. Temperature: Set your heat press to 300°F - 320°F ($150°C - 160°C$).

3. Pressure: Use Medium to Firm pressure.

4. First Press: Place the transfer design-side down and press for 12–15 seconds.

5. Peel: This is a COOl PEEL. Wait until the transfer is completely cool to the touch before slowly peeling the film away.

6. Finishing Press (Optional but Recommended): Cover the design with parchment paper or a Teflon sheet and press for another 5 seconds to lock the design into the fabric.

Note: A professional heat press is highly recommended for best results. If using a home iron, use the highest cotton setting (no steam) and apply heavy body weight, but results may vary.