DTF Transfers

1.      Pre-press: Press your garment for 5 seconds to remove any moisture and wrinkles.

2.      Temperature: Set your heat press to 300°F - 320°F ($150°C - 160°C$).

3.      Pressure: Use Medium to Firm pressure.

4.      First Press: Place the transfer design-side down and press for 12–15 seconds.

5.      Peel: This is a COOl PEEL. Wait until the transfer is completely cool to the touch before slowly peeling the film away.

6.      Finishing Press (Optional but Recommended): Cover the design with parchment paper or a Teflon sheet and press for another 5 seconds to lock the design into the fabric.

Note: A professional heat press is highly recommended for best results. If using a home iron, use the highest cotton setting (no steam) and apply heavy body weight, but results may vary.

 

“Don't want to press it yourself? Click here to Order your finished shirt